What two colors make peach?

Chromilla's oil recipe uses 3 tubes rather than two: 94% Titanium White, 3% Cadmium Red and 3% Burnt Sienna. Titanium White leads the mix. Chromilla's model predicts a 97% dry match against the target, scored against its own color model, not a measured paint-out.

What is the hex code for peach?

Chromilla uses #F3C6A5 as the target for peach. The oil recipe is predicted to dry to about #F5CAAB.

Can I mix peach without black?

Yes. Chromilla's oil recipe uses no black: 94% Titanium White, 3% Cadmium Red and 3% Burnt Sienna.

How to Mix Peach in Oil

Quick answer

To mix peach (#F3C6A5) in oil, use 94% Titanium White, 3% Cadmium Red and 3% Burnt Sienna. Chromilla's model predicts a 97% dry match against the target, scored against its own color model, not a measured paint-out. Chromilla is a web-based paint color mixer that turns any color, from a photo, the camera or a hex code, into exact paint-tube ratios for acrylic, oil and watercolor, using Kubelka-Munk pigment mixing and aiming at the color after it dries.

Adjust for my paints

Target

Peach

#F3C6A5

Predicted dry result

97% match when dry

Mix to #F5CAAB. It dries true to color.

Peach in oil: tube ratios, and ml for a 100 ml batch
Paint	Pigment	Share	100 ml batch
Titanium White	PW6	94%	94 ml
Cadmium Red	PR108	3%	3 ml
Burnt Sienna	PBr7	3%	3 ml

How we calculated this: Kubelka-Munk pigment mixing, then a per-medium dry shift, scored with CIEDE2000. Method and accuracy benchmark. Last checked August 2026.

Terms used here: Tinting strength, Dry shift, Kubelka-Munk, Delta E (dE2000), Pigment code, Gamut.

A warm, pale peach. This guide gives you the pigment ratios that land on #F3C6A5 in oil, using the same solver that powers the Chromilla mixer.

Pigment recipe

Checked August 2026

Ratios calibrated for oil. Start with the dominant pigment, add the modifiers in the order below, and adjust in 5% steps to your target swatch.

1. Titanium White
PW6
94%
2. Cadmium Red
PR108
3%
3. Burnt Sienna
PBr7
3%

What colors make Peach?

Titanium White, Cadmium Red, and Burnt Sienna, in roughly a 94:3:3 ratio.

How to make Peach in oil

Start with Titanium White at about 94% as your oil base, then work in Cadmium Red and Burnt Sienna in the order above. Adjust in 5% steps until the swatch reads #F3C6A5.

Why mix Peach instead of buying it

Mixing Peach yourself lets you approximate an expensive or hard to find tube from pigments you already own, match Peach across paint brands whose factory tubes differ, and rebuild the exact color when you run out mid painting. The recipe above is the working starting point.

Common mistakes

White cools and chalks a mix as you add it, so tint in small steps and stop before it goes pastel.

Variations on Peach

Each variation is its own target (lighter and darker move OKLCH lightness by 0.08; warmer and cooler turn the hue 12 degrees toward red or blue), solved fresh.

Lighter Peach

#FFE5D2

97% Titanium White and 3% Burnt Umber. Chromilla's model predicts an 87% dry match against the target, scored against its own color model, not a measured paint-out.

Darker Peach

#D8AD8C

84% Titanium White, 13% Burnt Umber and 3% Cadmium Red. Chromilla's model predicts a 100% dry match against the target, scored against its own color model, not a measured paint-out.

Warmer Peach

#F7C3AB

91% Titanium White, 5% Cadmium Red and 4% Yellow Ochre. Chromilla's model predicts a 99% dry match against the target, scored against its own color model, not a measured paint-out.

Cooler Peach

#F7C3AB

91% Titanium White, 5% Cadmium Red and 4% Yellow Ochre. Chromilla's model predicts a 99% dry match against the target, scored against its own color model, not a measured paint-out.

Peach questions

What two colors make peach?: Chromilla's oil recipe uses 3 tubes rather than two: 94% Titanium White, 3% Cadmium Red and 3% Burnt Sienna. Titanium White leads the mix. Chromilla's model predicts a 97% dry match against the target, scored against its own color model, not a measured paint-out.
How do you make peach paint lighter without losing the hue?: Re-balance the mix instead of only adding white. For a lighter peach (#FFE5D2) in oil, Chromilla mixes 97% Titanium White and 3% Burnt Umber. Chromilla's model predicts an 87% dry match against the target, scored against its own color model, not a measured paint-out.
What is the hex code for peach?: Chromilla uses #F3C6A5 as the target for peach. The oil recipe is predicted to dry to about #F5CAAB.
Can I mix peach without black?: Yes. Chromilla's oil recipe uses no black: 94% Titanium White, 3% Cadmium Red and 3% Burnt Sienna.

Peach in other mediums

Peach in Acrylic: 94% Titanium White, 3% Cadmium Red and 3% Burnt Sienna, predicted 89% dry match by Chromilla's color model.
Peach in Watercolor: 94% Titanium White, 3% Cadmium Red and 3% Burnt Sienna, predicted 90% dry match by Chromilla's color model.

Compare acrylic, oil and watercolor for peach

Get this recipe for your paint brand

Open the live mixer with Peach + oil pre-loaded and calibrate to your tubes.

Open in mixer

Deep-dive guide

How to mix Peach, the long version

Common mistakes, per-brand recipes, and the honest limits when the target sits outside what real paint can reach.

Read the guide

Technique guides for this color

Related mixing guides

Pigment mixing is subtractive, so small ratio changes matter. The mixer refines this recipe to your brand and updates on the fly.