Lighter Olive Skin Tone
#D3A37E
78% Titanium White, 19% Burnt Umber and 3% Cadmium Red. Chromilla's model predicts a 98% dry match against the target, scored against its own color model, not a measured paint-out.
How to Mix Olive Skin Tone in Oil
Quick answer
To mix olive skin tone (#B98A66) in oil, use 3 parts Titanium White to 2 parts Burnt Umber. Chromilla's model predicts a 97% dry match against the target, scored against its own color model, not a measured paint-out. Chromilla is a web-based paint color mixer that turns any color, from a photo, the camera or a hex code, into exact paint-tube ratios for acrylic, oil and watercolor, using Kubelka-Munk pigment mixing and aiming at the color after it dries.
Target
Olive Skin Tone
#B98A66
Predicted dry result
97% match when dryMix to #BA8A62. It dries true to color.
| Paint | Pigment | Parts | Share | 100 ml batch |
|---|---|---|---|---|
| Titanium White | PW6 | 3 | 61% | 61 ml |
| Burnt Umber | PBr7 | 2 | 39% | 39 ml |
How we calculated this: Kubelka-Munk pigment mixing, then a per-medium dry shift, scored with CIEDE2000. Method and accuracy benchmark. Last checked August 2026.
Terms used here: Tinting strength, Dry shift, Kubelka-Munk, Delta E (dE2000), Pigment code, Gamut.
A muted mid flesh tone with a green-yellow undertone. This guide gives you the pigment ratios that land on #B98A66 in oil, using the same solver that powers the Chromilla mixer.
Pigment recipe
Checked August 2026
Ratios calibrated for oil. Start with the dominant pigment, add the modifiers in the order below, and adjust in 5% steps to your target swatch.
1. Titanium White
PW6
61%2. Burnt Umber
PBr7
39%
What colors make Olive Skin Tone?
Titanium White and Burnt Umber, in roughly a 61:39 ratio.
How to make Olive Skin Tone in oil
Start with Titanium White at about 61% as your oil base, then work in Burnt Umber in the order above. Adjust in 5% steps until the swatch reads #B98A66.
Why mix Olive Skin Tone instead of buying it
Mixing Olive Skin Tone yourself lets you approximate an expensive or hard to find tube from pigments you already own, match Olive Skin Tone across paint brands whose factory tubes differ, and rebuild the exact color when you run out mid painting. The recipe above is the working starting point.
Common mistakes
White cools and chalks a mix as you add it, so tint in small steps and stop before it goes pastel.
Variations on Olive Skin Tone
Each variation is its own target (lighter and darker move OKLCH lightness by 0.08; warmer and cooler turn the hue 12 degrees toward red or blue), solved fresh.
Darker Olive Skin Tone
#A0724F
3 parts Burnt Umber to 2 parts Titanium White. Chromilla's model predicts a 96% dry match against the target, scored against its own color model, not a measured paint-out.
Warmer Olive Skin Tone
#BD876D
6 parts Titanium White, 3 parts Viridian Green and 2 parts Cadmium Red. Chromilla's model predicts a 99% dry match against the target, scored against its own color model, not a measured paint-out.
Cooler Olive Skin Tone
#BD876D
6 parts Titanium White, 3 parts Viridian Green and 2 parts Cadmium Red. Chromilla's model predicts a 99% dry match against the target, scored against its own color model, not a measured paint-out.
Olive Skin Tone questions
- What two colors make olive skin tone?
- In oil, Titanium White and Burnt Umber: 3 parts Titanium White to 2 parts Burnt Umber. Chromilla's model predicts a 97% dry match against the target, scored against its own color model, not a measured paint-out.
- How do you make olive skin tone paint lighter without losing the hue?
- Re-balance the mix instead of only adding white. For a lighter olive skin tone (#D3A37E) in oil, Chromilla mixes 78% Titanium White, 19% Burnt Umber and 3% Cadmium Red. Chromilla's model predicts a 98% dry match against the target, scored against its own color model, not a measured paint-out.
- What is the hex code for olive skin tone?
- Chromilla uses #B98A66 as the target for olive skin tone. The oil recipe is predicted to dry to about #BA8A62.
- Can I mix olive skin tone without black?
- Yes. Chromilla's oil recipe uses no black: 3 parts Titanium White to 2 parts Burnt Umber.
Olive Skin Tone in other mediums
- Olive Skin Tone in Acrylic: 3 parts Titanium White to 2 parts Burnt Umber, predicted 88% dry match by Chromilla's color model.
- Olive Skin Tone in Watercolor: 3 parts Titanium White to 2 parts Burnt Umber, predicted 90% dry match by Chromilla's color model.
Get this recipe for your paint brand
Open the live mixer with Olive Skin Tone + oil pre-loaded and calibrate to your tubes.
Technique guides for this color
Related mixing guides
Pigment mixing is subtractive, so small ratio changes matter. The mixer refines this recipe to your brand and updates on the fly.