What two colors make skin tone (medium)?

Chromilla's oil recipe uses 3 tubes rather than two: 9 parts Titanium White, 4 parts Burnt Umber and 1 part Cadmium Red. Titanium White leads the mix. Chromilla's model predicts a 98% dry match against the target, scored against its own color model, not a measured paint-out.

What is the hex code for skin tone (medium)?

Chromilla uses #C68A63 as the target for skin tone (medium). The oil recipe is predicted to dry to about #C48A66.

Can I mix skin tone (medium) without black?

Yes. Chromilla's oil recipe uses no black: 9 parts Titanium White, 4 parts Burnt Umber and 1 part Cadmium Red.

How to Mix Skin Tone (Medium) in Oil

Quick answer

To mix skin tone (medium) (#C68A63) in oil, use 9 parts Titanium White, 4 parts Burnt Umber and 1 part Cadmium Red. Chromilla's model predicts a 98% dry match against the target, scored against its own color model, not a measured paint-out. Chromilla is a web-based paint color mixer that turns any color, from a photo, the camera or a hex code, into exact paint-tube ratios for acrylic, oil and watercolor, using Kubelka-Munk pigment mixing and aiming at the color after it dries.

Adjust for my paints

Target

Skin Tone (Medium)

#C68A63

Predicted dry result

98% match when dry

Mix to #C48A66. It dries true to color.

Skin Tone (Medium) in oil: tube ratios, and ml for a 100 ml batch
Paint	Pigment	Parts	Share	100 ml batch
Titanium White	PW6	9	65%	65 ml
Burnt Umber	PBr7	4	28%	28 ml
Cadmium Red	PR108	1	7%	7 ml

How we calculated this: Kubelka-Munk pigment mixing, then a per-medium dry shift, scored with CIEDE2000. Method and accuracy benchmark. Last checked August 2026.

Terms used here: Tinting strength, Dry shift, Kubelka-Munk, Delta E (dE2000), Pigment code, Gamut.

A mid-warm skin tone. Fills the gap between light and deep. This guide gives you the pigment ratios that land on #C68A63 in oil, using the same solver that powers the Chromilla mixer.

Pigment recipe

Checked August 2026

Ratios calibrated for oil. Start with the dominant pigment, add the modifiers in the order below, and adjust in 5% steps to your target swatch.

1. Titanium White
PW6
65%
2. Burnt Umber
PBr7
28%
3. Cadmium Red
PR108
7%

What colors make Skin Tone (Medium)?

Titanium White, Burnt Umber, and Cadmium Red, in roughly a 65:28:7 ratio.

How to make Skin Tone (Medium) in oil

Start with Titanium White at about 65% as your oil base, then work in Burnt Umber and Cadmium Red in the order above. Adjust in 5% steps until the swatch reads #C68A63.

Why mix Skin Tone (Medium) instead of buying it

Mixing Skin Tone (Medium) yourself lets you approximate an expensive or hard to find tube from pigments you already own, match Skin Tone (Medium) across paint brands whose factory tubes differ, and rebuild the exact color when you run out mid painting. The recipe above is the working starting point.

Common mistakes

White cools and chalks a mix as you add it, so tint in small steps and stop before it goes pastel.

Variations on Skin Tone (Medium)

Each variation is its own target (lighter and darker move OKLCH lightness by 0.08; warmer and cooler turn the hue 12 degrees toward red or blue), solved fresh.

Lighter Skin Tone (Medium)

#E1A37B

81% Titanium White, 13% Raw Umber and 6% Alizarin Crimson. Chromilla's model predicts a 99% dry match against the target, scored against its own color model, not a measured paint-out.

Darker Skin Tone (Medium)

#AC724B

5 parts Burnt Umber to 4 parts Titanium White. Chromilla's model predicts a 96% dry match against the target, scored against its own color model, not a measured paint-out.

Warmer Skin Tone (Medium)

#CA876D

8 parts Titanium White, 3 parts Cadmium Red and 2 parts Viridian Green. Chromilla's model predicts a 99% dry match against the target, scored against its own color model, not a measured paint-out.

Cooler Skin Tone (Medium)

#CA876D

8 parts Titanium White, 3 parts Cadmium Red and 2 parts Viridian Green. Chromilla's model predicts a 99% dry match against the target, scored against its own color model, not a measured paint-out.

Skin Tone (Medium) questions

What two colors make skin tone (medium)?: Chromilla's oil recipe uses 3 tubes rather than two: 9 parts Titanium White, 4 parts Burnt Umber and 1 part Cadmium Red. Titanium White leads the mix. Chromilla's model predicts a 98% dry match against the target, scored against its own color model, not a measured paint-out.
How do you make skin tone (medium) paint lighter without losing the hue?: Re-balance the mix instead of only adding white. For a lighter skin tone (medium) (#E1A37B) in oil, Chromilla mixes 81% Titanium White, 13% Raw Umber and 6% Alizarin Crimson. Chromilla's model predicts a 99% dry match against the target, scored against its own color model, not a measured paint-out.
What is the hex code for skin tone (medium)?: Chromilla uses #C68A63 as the target for skin tone (medium). The oil recipe is predicted to dry to about #C48A66.
Can I mix skin tone (medium) without black?: Yes. Chromilla's oil recipe uses no black: 9 parts Titanium White, 4 parts Burnt Umber and 1 part Cadmium Red.

Skin Tone (Medium) in other mediums

Skin Tone (Medium) in Acrylic: 9 parts Titanium White, 4 parts Burnt Umber and 1 part Cadmium Red, predicted 87% dry match by Chromilla's color model.
Skin Tone (Medium) in Watercolor: 9 parts Titanium White, 4 parts Burnt Umber and 1 part Cadmium Red, predicted 88% dry match by Chromilla's color model.

Compare acrylic, oil and watercolor for skin tone (medium)

Get this recipe for your paint brand

Open the live mixer with Skin Tone (Medium) + oil pre-loaded and calibrate to your tubes.

Open in mixer

Deep-dive guide

How to mix Medium Skin Tone, the long version

Common mistakes, per-brand recipes, and the honest limits when the target sits outside what real paint can reach.

Read the guide

Technique guides for this color

Related mixing guides

Pigment mixing is subtractive, so small ratio changes matter. The mixer refines this recipe to your brand and updates on the fly.