What two colors make beige?

Chromilla's acrylic recipe uses 3 tubes rather than two: 87% Titanium White, 9% Burnt Umber and 4% Viridian Green. Titanium White leads the mix. Chromilla's model predicts an 87% dry match against the target, scored against its own color model, not a measured paint-out.

Why does beige look different when acrylic dries?

Acrylic binder looks milky while wet and clears as it dries, so the dried film reads darker. Chromilla's model applies a 10% value shift for acrylic, so the wet mix #D8C2A3 is predicted to dry to about #C5AF91. Dries slightly darker and a touch warmer.

What is the hex code for beige?

Chromilla uses #D8C3A5 as the target for beige. The acrylic recipe is predicted to dry to about #C5AF91.

Can I mix beige without black?

Yes. Chromilla's acrylic recipe uses no black: 87% Titanium White, 9% Burnt Umber and 4% Viridian Green.

How to Mix Beige in Acrylic

Quick answer

To mix beige (#D8C3A5) in acrylic, use 87% Titanium White, 9% Burnt Umber and 4% Viridian Green. Chromilla's model predicts an 87% dry match against the target, scored against its own color model, not a measured paint-out. Chromilla is a web-based paint color mixer that turns any color, from a photo, the camera or a hex code, into exact paint-tube ratios for acrylic, oil and watercolor, using Kubelka-Munk pigment mixing and aiming at the color after it dries.

Adjust for my paints

Target

Beige

#D8C3A5

Predicted dry result

87% match when dry

Mix to #D8C2A3 while wet. It dries to about #C5AF91.

Beige in acrylic: tube ratios, and ml for a 100 ml batch
Paint	Pigment	Share	100 ml batch
Titanium White	PW6	87%	87 ml
Burnt Umber	PBr7	9%	9 ml
Viridian Green	PG18	4%	4 ml

How we calculated this: Kubelka-Munk pigment mixing, then a per-medium dry shift, scored with CIEDE2000. Method and accuracy benchmark. Last checked August 2026.

Terms used here: Tinting strength, Dry shift, Kubelka-Munk, Delta E (dE2000), Pigment code, Gamut.

A soft neutral beige, warmer than gray. This guide gives you the pigment ratios that land on #D8C3A5 in acrylic, using the same solver that powers the Chromilla mixer.

Pigment recipe

Checked August 2026

Ratios calibrated for acrylic. Start with the dominant pigment, add the modifiers in the order below, and adjust in 5% steps to your target swatch.

1. Titanium White
PW6
87%
2. Burnt Umber
PBr7
9%
3. Viridian Green
PG18
4%

What colors make Beige?

Titanium White, Burnt Umber, and Viridian Green, in roughly a 87:9:4 ratio.

How to make Beige in acrylic

Start with Titanium White at about 87% as your acrylic base, then work in Burnt Umber and Viridian Green in the order above. Adjust in 5% steps until the swatch reads #D8C3A5.

Why mix Beige instead of buying it

Mixing Beige yourself lets you approximate an expensive or hard to find tube from pigments you already own, match Beige across paint brands whose factory tubes differ, and rebuild the exact color when you run out mid painting. The recipe above is the working starting point.

Common mistakes

White cools and chalks a mix as you add it, so tint in small steps and stop before it goes pastel.

Variations on Beige

Each variation is its own target (lighter and darker move OKLCH lightness by 0.08; warmer and cooler turn the hue 12 degrees toward red or blue), solved fresh.

Lighter Beige

#F2DDBE

92% Titanium White, 5% Yellow Ochre and 3% Burnt Umber. Chromilla's model predicts an 85% dry match against the target, scored against its own color model, not a measured paint-out.

Darker Beige

#BEAA8C

80% Titanium White, 16% Burnt Umber and 4% Ultramarine Blue. Chromilla's model predicts an 88% dry match against the target, scored against its own color model, not a measured paint-out.

Warmer Beige

#DCC1A7

83% Titanium White, 7% Viridian Green, 6% Yellow Ochre and 4% Cadmium Red. Chromilla's model predicts an 89% dry match against the target, scored against its own color model, not a measured paint-out.

Cooler Beige

#DCC1A7

Beige questions

What two colors make beige?: Chromilla's acrylic recipe uses 3 tubes rather than two: 87% Titanium White, 9% Burnt Umber and 4% Viridian Green. Titanium White leads the mix. Chromilla's model predicts an 87% dry match against the target, scored against its own color model, not a measured paint-out.
How do you make beige paint lighter without losing the hue?: Re-balance the mix instead of only adding white. For a lighter beige (#F2DDBE) in acrylic, Chromilla mixes 92% Titanium White, 5% Yellow Ochre and 3% Burnt Umber. Chromilla's model predicts an 85% dry match against the target, scored against its own color model, not a measured paint-out.
Why does beige look different when acrylic dries?: Acrylic binder looks milky while wet and clears as it dries, so the dried film reads darker. Chromilla's model applies a 10% value shift for acrylic, so the wet mix #D8C2A3 is predicted to dry to about #C5AF91. Dries slightly darker and a touch warmer.
What is the hex code for beige?: Chromilla uses #D8C3A5 as the target for beige. The acrylic recipe is predicted to dry to about #C5AF91.
Can I mix beige without black?: Yes. Chromilla's acrylic recipe uses no black: 87% Titanium White, 9% Burnt Umber and 4% Viridian Green.

Beige in other mediums

Beige in Oil: 87% Titanium White, 9% Burnt Umber and 4% Viridian Green, predicted 99% dry match by Chromilla's color model.
Beige in Watercolor: 87% Titanium White, 9% Burnt Umber and 4% Viridian Green, predicted 88% dry match by Chromilla's color model.

Compare acrylic, oil and watercolor for beige

Get this recipe for your paint brand

Open the live mixer with Beige + acrylic pre-loaded and calibrate to your tubes.

Open in mixer

Deep-dive guide

How to mix Beige, the long version

Common mistakes, per-brand recipes, and the honest limits when the target sits outside what real paint can reach.

Read the guide

New to browns? See what colors make brown, in plain terms.

Technique guides for this color

Related mixing guides

Pigment mixing is subtractive, so small ratio changes matter. The mixer refines this recipe to your brand and updates on the fly.